Condensação Em Edificações: Uma Pesquisa Bibliográfica
Palavras-chave:
Análise higrotérmica. Condensação superficial. Umidade. Desempenho higrotérmico.Resumo
A condensação superficial é um parâmetro fundamental na análise de desempenho das edificações e tem influência nos quesitos de habitabilidade e durabilidade. O objetivo deste estudo é proporcionar maior familiaridade com o tema, identificando os fatores que causam o fenômeno da condensação, aprofundando o conhecimento através de materiais já publicados a nível nacional e internacional. Para alcançar o objetivo proposto, este estudo fundamenta-se no método científico de revisão narrativa. Desta forma, pode ser classificado, em termos de natureza, como uma pesquisa básica, pois trata-se de conhecimento sem a intenção de resolver lacunas teórico-práticas. Este estudo contribui para a discussão a respeito da condensação superficial e do impacto da umidade em edificações, com diferentes volumes, sistemas construtivos e climas brasileiros.
Referências
AUSTRALIAN BUILDING CODES BOARD (ABCB). Condensation in buildings Handbook. Canberra: ABCB, 2014.
ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS (ABNT). NBR 15220-1: Desempenho térmico de edificações - Parte 1: Definições, simbolos e unidades. Rio de Janeiro: ABNT, 2005a.
_____. NBR 15220-2: Desempenho térmico de edificações - Parte 2: Métodos de cálculo da transmitância, da capacidade térmica, do atraso térmico e do fator solar de elementos e componentes de edificações. Rio de Janeiro: ABNT, 2005b.
_____. NBR 15220-3: Desempenho térmico de edificações - Parte 3: Zoneamento bioclimático brasileiro e diretrizes construtivas para habitações unifamiliares de interesse social. Rio de Janeiro: ABNT, 2005c.
_____. NBR 15575 - Edificações habitacionais — Desempenho. Rio de Janeiro: ABNT, 2013.
ALMEIDA, R. M. S. F.; DE FREITAS, V. P. An insulation thickness optimization methodology for school buildings rehabilitation combining artificial neural networks and life cycle cost. Journal of Civil Engineering and Management, v. 22, n. 7, p. 915-923, 12 Jul. 2016.
AMERICAN SOCIETY OF HEATING, REFRIGERATING AND AIR-CONDITIONING ENGINEERS (ASHRAE). Handbook of Fundamentals. Atlanta: ANSI/ASHRAE, 2009.
ANTONYOVÁ, A.; ANTONY, P.; KORJENIC, A. Evaluation the hygrothermal effects of integration the vegetation into the building envelope. Energy & Buildings, v. 136, p. 121–138, 2017.
ANTRETTER, F. et al. WUFI ® Plus 3.1 Manual. Holzkirchen: Fraunhofer Institut für Bauphysik, 2017.
ARUNDEL, A. V. et al. Indirect health effects of relative humidity in indoor environments. Environmental Health Perspectives, v. VOL. 65, n. 3, p. 351–361, 1986.
ASPHAUG, S. K. et al. Moisture control strategies of habitable basements in cold climates. Building and Environment, v. 169, n. June 2019, 2020.
BADEMLİOĞLU, A. H.; KAYNAKLI, Ö.; YAMANKARADENIZ, N. The effect of water vapor diffusion resistance factor of insulation materials for outer walls on condensation. Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology, v. 38, n. 2, p. 15–23, 2018.
BAGARIĆ, M.; BANJAD PEČUR, I.; MILOVANOVIĆ, B. Hygrothermal performance of ventilated prefabricated sandwich wall panel from recycled construction and demolition waste – A case study. Energy and Buildings, 109573, v. 206, 2020.
BARREIRA, E.J.M.P.Q. et al. Exterior condensations on façades: numerical simulation of the undercooling phenomenon. Journal of Building Performance Simulation, v.6, n. 5, p. 337-345, 2013.
BARREIRA, E. et al. Procedures in the construction of a test reference year for Porto-Portugal and implications for hygrothermal simulation. Sustainable Cities and Society, v. 32, n. March, p. 397–410, 2017.
BAUGHMAN, A. V.; ARENS, E. A. Indoor humidity and human health - Part I: Literature review of health effects of humidity-influenced indoor pollutants. ASHRAE Transactions, v. 102, n. 1, p. 193–211, 1996.
BERARDI, U.; NALDI, M. The impact of the temperature dependent thermal conductivity of insulating materials on the effective building envelope performance. Energy & Buildings, v. 144, p. 262–275, 2017.
BISENIECE, E. E. et al. Thermal performance of internally insulated historic brick building in cold climate: A long term case study. Energy and Buildings, v. 152, p. 577–586, 2017.
BRÁS, A. et al. Performance-based methods for masonry building rehabilitation using innovative leaching and hygrothermal risk analyses. Sustainable Cities and Society, v. 28, p. 321–331, 2017.
BRODERICK, Á. et al. A pre and post evaluation of indoor air quality, ventilation, and thermal comfort in retrofitted co-operative social housing. Building and Environment, v. 122, p. 126–133, 2017.
BRITISH STANDARD (BS). BS 5250 - Code of practice for control of condensation in buildings. Londres: BSI, 2016
BYRNE, A. et al. Case studies of cavity and external wall insulation retrofitted under the Irish Home Energy Saving Scheme : Technical analysis and occupant perspectives. Energy & Buildings, v. 130, p. 420–433, 2016.
CAMPBELL, N. et al. Monitoring the hygrothermal and ventilation performance of retrofitted clay brick solid wall houses with internal insulation: Two UK case studies. Case Studies in Construction Materials, v. 7, n. nov. 2016, p. 163–179, 2017.
CUNHA, A. L. A. da. Simulação Numérica do Comportamento Higrotérmico de Edifícios: Aplicação à Avaliação de Risco de Condesações Internas. 2009. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2009.
DE PLACE HANSEN, E. J.; MØLLER, E. B. Moisture supply in Danish single-family houses – the influence of building style. Energy Procedia, v. 132, p. 147–152, 2017.
DEUTSCHES INSTITUT FÜR NORMUNG (DIN). DIN 4108 – Wärmeschutz und Energie-Einsparung in Ge-bäuden. Berlin: DIN, 2013.
_____. DIN 1946-4 – Raumlufttechnik – Teil 4: Raumlufttechnische Anlagen in Gebäuden und Räumen des Gesundheitswesens. Berlin: DIN, 2016.
DJEDJIG, R.; BELARBI, R.; BOZONNET, E. Experimental study of green walls impacts on buildings in summer and winter under an oceanic climate. Energy & Buildings, v. 150, p. 403–411, 2017.
DUARTE, J. P. S. R. F. Condensações superfíciais interiores: Avaliação do Risco. 2010. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2010.
EMERY, T. et al. Toitū te kāinga toitū te ora toitū te tangata - Healthy homes, healthy people. 1. ed. Rotorua: Toi Ohomai Institute of Technology, 2019. E-book.
EUROPEAN STANDARD (EN). EN 15251 - Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics. Brussels: EN, 2007a.
_____. EN 15026 - Hygrothermal performance of building components and building elements. Assessment of moisture transfer by numerical simulation. Pilsen: EN, 2007b.
EYE, F. Von et al. Quantificação da ação do clima na degradação de fachadas em argamassa empregando a simulação higrotérmica. In: SIMPÓSIO BRASILEIRO DE TECNOLOGIA DAS ARGAMASSAS, XII, 2017, São Paulo. Anais [...]. São Paulo: SBTA, 2017
FANG, A.; CHEN, Y.; WU, L. Transient simulation of coupled heat and moisture transfer through multi-layer walls exposed to future climate in the hot and humid southern China area. Sustainable Cities and Society, v. 52, n. February 2019, p. 101812, 2020.
FEDORIK, F.; HAAPALA, A. Impact of Air-gap Design to Hygro-thermal Properties and Mould Growth Risk between Concrete Foundation and CLT Frame. Energy Procedia, v. 132, p. 117–122, 2017.
FRASCA, F.; CORNARO, C.; SIANI, A. M. Performance assessment of a heat and moisture dynamic simulation model in IDA ICE by the comparison with WUFI Plus. IOP Conference Series: Materials Science and Engineering, v. 364, n. 012024, 2018.
FREITAS, V. P. de; PINTO, P. da S. Permeabilidade ao vapor de materiais de construção - condensações internas. 2. ed. LFC: FCT, 1998.
FREITAS, V. P. de; TORRES, M. I.; GUIMARÃES, A. S. Humidade Ascensional. Lisboa: FEUP, 2008.
FREITAS, J. M. R. et al. Análise da influência das pontes térmicas na simulação de eficiência energética nas paredes de edificações residenciais. Revista de Arquitetura IMED, v. 5, n. 2, p. 24–41, 2016.
FROTA, A. B.; SCHIFFER, S. R. Manual de conforto térmico. 5. ed. São Paulo: Studio Nobel, 2001.
GHOLAMI, M. et al. A comparison of energy and thermal performance of rooftop greenhouses and green roofs in Mediterranean climate: A hygrothermal assessment in WuFi. Energies, v. 13, n. 8, p. 15, 2020.
GIANANGELI, A.; DI GIUSEPPE, E.; D’ORAZIO, M. Design and performance assessment of building counter-walls integrating Moisture Buffering “active” devices. Energy Procedia, v. 132, p. 105–110, 2017.
GINJA, J. et al. Qualidade do ar interior nas habitações Portuguesas. In: CONGRESS OF INNOVATION ON SUSTAINABLE CONSTRUCTION, 12, 2012, Aveiro. Anais […]. Aveiro: CINCOS’ 12, 2012.
GOMES, M. G. et al. The influence of moisture content on the thermal conductivity of external thermal mortars. Construction and Building Materials, v. 135, p. 279–286, 2017.
GRIGOLETTI, G. de C.; SATTLER, M. A. Método de avaliação global de desempenho higrotérmico de habitações de interesse social para Porto Alegre - RS. Ambiente Construído (Online), v. 10, p. 101/8460-114, 2010.
HAGENTOFT, C.; KALAGASIDIS, A. S. Drying potential of cold attic using natural and controlled ventilation in different Swedish climates. Procedia Engineering, v. 146, p. 2–7, 2016.
HANSEN, T. et al. Material characterization models and test methods for historic building materials. Energy Procedia, v. 132, p. 315–320, 2017.
HAO, L. et al. Assessing the impact of climate change on energy retrofit of alpine historic buildings: Consequences for the hygrothermal performance. IOP Conference Series: Earth and Environmental Science, v. 410, n. 1, 2020.
HENRIQUES, F. M. A. Humidade em Paredes. Lisboa: Laboratório Nacional de Engenharia Civil, 1994.
HOLM, A.; KÜNZEL, H. M.; SEDLBAUER, K. the Hygrothermal Behaviour of Rooms : Combining Thermal Building Simulation and Hygrothermal Envelope Calculation. In: (E. I. I. Conference, Org.) 2003, Eindhoven. Building Simulation. Eindhoven: Eighth International IBPSA Conference, 2003. p. 499–506.
HOLZHUETER, K.; ITONAGA, K. An Evaluation of WUFI-Bio to Predict Mold Growth in Straw Bale Walls in Japan. Journal of Asian Architecture and Building Engineering, v. 362, p. 357–362, 2017.
INSTITUTO NACIONAL DE METROLOGIA, QUALIDADE E TECNOLOGIA (INMETRO). Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais. Rio de Janeiro: INMETRO, 2012.
INSTITUTE OF MEDICINE OF THE NATIONAL ACADEMIES. Damp indoor spaces and health. 1. ed. Washington: IMNA, 2004. .
IOMMI, M. The mediterranean smart adaptive wall. An experimental design of a smart and adaptive facade module for the mediterranean climate. Energy & Buildings, v. 158, p. 1450–1460, 2018.
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO). ISO 13788:2012 - Hygrothermal performance of building components and building elements -- Internal surface temperature to avoid critical surface humidity and interstitial condensation -- Calculation methods. Geneva: ISO, 2012.
_____. Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. Geneva: ISO, 2005.
JORNE, F. J. F. Análise Do Comportamento Higrotérmico De Soluções Construtivas De Paredes Em Regime Variável. 2010. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Lisboa, 2010.
KACZMAREK, A.; WESO, M. Factors affecting humidity conditions of a face wall layer of a heated building. Procedia Engineering, v. 193, p. 205–210, 2017.
KARAGIOZIS, A.; SALONVAARA, M. Hygrothermal system-performance of a whole building. Building and Environment, v. 36, n. 6, p. 779–787, 2001.
KOČÍ, J.; ČERNÝ, R. Effect of Weather Data Selection on Simulated Moisture and Temperature Fields in Building Envelopes in Central Europe. Energy Procedia, v. 132, p. 514–519, 2017.
KORJENIC, A.; ZACH, J.; HROUDOVÁ, J. The use of insulating materials based on natural fibers in combination with plant facades in building constructions. Energy & Buildings, v. 116, p. 45–58, 2016.
KÜNZEL, H. M. Verfahren zur ein-und zweidimensionalen Berechnung des gekoppelten Wärme-und Feuchtetransports in Bauteilen mit einfachen Kennwerten. 1994. These (Doktor-Ingenieurs) – Fakultät Bauingenieur, Universität Stuttgart, Stuttgart, 1994.
KÜNZEL, H. M. et al. Simulation of indoor temperature and humidity conditions including hygrothermal interactions with the building envelope. Solar Energy, v. 78, n. 4, p. 554–561, 2005.
KÜNZEL, H. M.; HOLM, A. H. Moisture Control and problem analysis of heritage constructions. In: Encontro sobre Patologia e Reabilitação de Edifícios, 3, 2009, Porto. Anais [...]. Porto: PATORREB2009, 2009. p. 85–102.
KURKINEN, K. Case Study of a Cold Attic in a Pitched Roof with Minimal Ventilation. Energy Procedia, v. 132, p. 466–471, 2017.
LEE, J. et al. Prediction evaluating of moisture problems in light-weight wood structure: Perspectives on regional climates and building materials. Building and Environment, v. 168, p. 106521, 2020.
LI, Y. et al. Towards energy-Efficient homes: Evaluating the hygrothermal performance of different wall assemblies through long-term field monitoring. Energy & Buildings, v. 121, p. 43–56, 2016.
MARINCIONI, V.; ALTAMIRANO-MEDINA, H. Analysis of the suitability of mould growth models for the risk assessment of woodfibre internal wall insulation. Energy Procedia, v. 132, p. 183–188, 2017.
MARTÍNEZ, P.; SARMIENTO, P.; URQUIETA, W. Evaluación de la humedad por condensación al interior de viviendas sociales. Revista INVI, v. 20, n. 55, p. 154–165, 2005.
MEISSNER, F.; STÖCKER, E.; VOGELSANG, S. Approaches for the boundary envelope design of an enhanced façade test facility. Energy Procedia, v. 132, p. 369–374, 2017.
MØLLER, E. B. et al. Conditions for mould growth on typical interior surfaces. Energy Procedia, v. 132, p. 171–176, 2017.
MØLLER, E. B.; DE PLACE HANSEN, E. J. Moisture supply in Danish single-family houses - The influence of occupant behavior and type of room. Energy Procedia, v. 132, p. 141–146, 2017.
MØLLER, E. B.; MORELLI, M.; HANSEN, T. Air change rate in ventilated attics – reality and input for simulations. In: MATEC 2019, Prague. MATEC Web of Conferences. Prague: CESBP 2019, 2019. p. 6. Anais... . Prague: CESBP, 2019.
MOREIRA, L. D. N. Avaliação de soluções cobertura: comportamento à humidade e ACV. 2020. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2020.
NASCIMENTO, M. L. M. et al. Wind-driven rain incidence parameters obtained by hygrothermal simulation. Journal of Building Pathology and Rehabilitation, v. 1, p. 5, 2016.
NGUYEN, C.-K. et al. A full-scale experimental study concerning the moisture condensation on building glazing surface. Building and Environment, v. 156, p. 215–224, 2019.
NIK, V. M. Application of typical and extreme weather data sets in the hygrothermal simulation of building components for future climate – A case study for a wooden frame wall. Energy & Buildings, v. 154, p. 30–45, 2017.
NUNO, M.M.R. et al. Indoor hygrothermal conditions and quality of life in social housing: A comparison between two neighbourhoods. Sustainable Cities and Society, v. 38, p. 80-90, 2018.
ORTOLAN, V. K. et al. Análise da possibilidade de condensação em paredes de concreto revestidas ou não com perfis de PVC - Estudo de caso. In: CONPAT 2015. Lisboa: CONPAT, 2015. p. 1–8. Anais... Lisboa: CONPAT, 2015.
PAULA, P. R. F. de. Avaliação Do Desempenho Higrotérmico De Casas De Gesso No Brasil. 2017. Tese (Doutorado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2017.
PEREIRA, F. P. F. Avaliação do comportamento dos ocupantes no desempenho higrotérmico em edifícios residenciais. 2018. Tese (Doutorado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2018.
PÉREZ, C. A. F. Calificación ambiental de la vivienda . Estrategias de adaptabilidad higrotérmica. Revista Electrónica Nova Scientia, v. 8, n. 16, p. 278–312, 2016.
PIHELO, P.; KIKKAS, H.; KALAMEES, T. Hygrothermal Performance of Highly Insulated Timber-frame External Wall. Energy Procedia, v. 96, n. out., p. 685–695, 2016.
PINHEIRO, J. A. Importância Do Clima Exterior E Interior Na Quantificação Do Desempenho Higrotérmico Dos Edifícios. 2013. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2013.
PINTO, M.; VIEGAS, J.; FREITAS, V. Performance sensitivity study of mixed ventilation systems in multifamily residential buildings in Portugal. Energy & Buildings, v. 152, p. 534–546, 2017.
PIRES, J. R. Investigação da viabilidade da redução do consumo de energia elétrica em edificações residenciais através da aplicação de soluções de conforto ambiental passivo. 2013. Dissertação (Mestrado em Engenharia Civil) – Programa de Pós-Graduação em Engenharia Civil, Universidade do Vale do Rio dos Sinos, São Leopoldo, 2013.
POZAS, B. M.; GONZÁLEZ, F. J. N. Hygrothermal behaviour and thermal comfort of the vernacular housings in the Jerte Valley ( Central System , Spain ). Energy & Buildings, v. 130, p. 219–227, 2016.
RAAMETS, J. et al. Determination of hygrothermal performance of clay-sand plaster: Influence of covering on sorption and water vapour permeability. Energy Procedia, v. 132, p. 267–272, 2017.
SAITO, H. Application of the Wood Degradation Model to an Actual Roof Assembly subjected to Rain Penetration. Energy Procedia, v. 132, p. 399–404, 2017.
SALES, P. N. D. S. Avaliação do Risco de Desenvolvimento de Bolores Simulação Numérica. 2016. Dissertação (Mestrado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2016.
SANCHO SALAS, A. La simulación digital como herramienta para el reacondicionamiento bioclimático de edificios. Anales de Edificación, v. 3, n. 1, p. 32–43, 2017.
SANTOS, A. do N. dos. Comportamento Higrotérmico De Paredes Em Gesso – Avaliação Da Adequabilidade a Zonas Climáticas Do Brasil. 2017. Tese (Doutorado em Engenharia Civil) – Faculdade de Engenharia, Universidade do Porto, Porto, 2017.
SILVA, A. S. Desenvolvimento de um método para avaliação do desempenho térmico e energético de edificações aplicando análise de incertezas e sensibilidade. 2016. Tese (Doutorado em Engenharia Civil) – Programa de Pós-Graduação em Engenharia Civil, Universidade Federal de Santa Catarina, Florianópolis, 2016.
SILVEIRA, V. D. C.; PINTO, M. M.; WESTPHAL, F. S. Influence of environmental factors favorable to the development and proliferation of mold in residential buildings in tropical climates. Building and Environment, v. 166, p. 106421, 2019.
SLETNES, M.; JELLE, B. P.; RISHOLT, B. Feasibility study of novel integrated aerogel solutions. Energy Procedia, v. 132, p. 327–332, 2017.
SOUDANI, L. et al. Assessment of the validity of some common assumptions in hygrothermal modeling of earth based materials. Energy & Buildings, [S. l.], v. 116, p. 498–511, 2016.
STARAKIEWICZ, A. et al. Methods for determining mold development and condensation on the surface of building barriers. Buildings, [S. l.], v. 10, n. 1, 2020.
STERLING, E. M.; ARUNDEL, A.; STERLING, T. D. Criteria for Human Exposure To Humidity in Occupied Buildings. ASHRAE Transactions, v. 91, p. 611–622, 1985.
VALDERRAMA-ULLOA, C. et al. Indoor environmental quality in latin american buildings: A systematic literature review. Sustainability (Switzerland), v. 12, n. 2, p. 1–19, 2020.
VAN SCHIJNDEL, A. W. M. Combining three main modeling methodologies for heat, air, moisture and pollution modeling. Energy Procedia, v. 132, p. 195–200, 2017.
VANPACHTENBEKE, M. et al. Hygrothermal behaviour of timber frame walls finished with a brick veneer cladding. Energy Procedia, v. 132, p. 363–368, 2017.
VASILE, V. et al. Indoor air quality – a key element of the energy performance of the buildings. Energy Procedia, v. 96, p. 277–284, 2016.
WORLD HEALTH ORGANIZATION (WHO). WHO guidelines for IAQ - Dampness and Mold. Germany: Druckpartner Moser, 2009.
YOU, S. et al. Study on moisture condensation on the interior surface of buildings in high humidity climate. Building and Environment, v. 125, p. 39–48, 2017.
YOUSEFI, F.; GHOLIPOUR, Y.; YAN, W. A study of the impact of occupant behaviors on energy performance of building envelopes using occupants ’ data. Energy & Buildings, v. 148, p. 182–198, 2017.
ZANONI, V. A. G. et al. Estudo higrotérmico na autoconstrução: simulação computacional e medições em campo. Ambiente Construído, v. 20, n. 3, p. 109–120, 2020.
ZHANG, Q.; YANG, Z.; GAO, Y. The multi-goal optimal analysis of stand-alone gas engine heat pump system with energy storage ( ESGEHP ) system. Energy & Buildings, v. 139, p. 525–534, 2017.
ZHAO, J.; MEISSENER, F. Experimental investigation of moisture properties of historic building material with hydrophobization treatment. Energy Procedia, v. 132, p. 261–266, 2017.
ZHOU, X.; DEROME, D.; CARMELIET, J. Hygrothermal modeling and evaluation of freeze-thaw damage risk of masonry walls retrofitted with internal insulation. Building and Environment, v. 125, p. 285–298, 2017.
ZIRKELBACH, D. et al. A hygrothermal green roof model to simulate moisture and energy performance of building components. Energy & Buildings, v. 145, p. 79–91, 2017.
